NHD-0216HZ-FSW-FBW-3V3C
Newhaven Display
14.3 Reliability of LCM Reliability test condition:
Item Condition Time (hrs) Assessment
High temp. Storage
80C
48
No abnormalities
in functions
and appearance
High temp. Operating
70C
48
Low temp. Storage
-30C
48
Low temp. Operating
-20C
48
Humidity
40C/ 90%RH
48
Temp. Cycle
0C
25
C 50C
(30 min
5 min
30min)
10cycles
Recovery time should be 24 hours minimum. Moreover,
functions, performance and appearance shall be free
from remarkable deterioration within 50,000 hours under ordinary operating and storage conditions room
temperature (20+8C), normal humidity (below 65% RH), and in the area not exposed to direct sun light.
14.4 Precaution for using LCD/LCM
LCD/LCM is assembled and adjusted with a high degree of precision. Do not attempt to make
any alteration or modification. The followings should be noted.
General Precautions:
1. LCD panel is made of glass. Avoid excessive mechanical shock or applying strong
pressure onto the surface of display area.
2. The polarizer used on the display surface is easily scratched and damaged. Extreme care
should be taken when handling. To clean dust or dirt off the display surface, wipe gently
with cotton, or other soft material soaked with isoproply alcohol, ethyl alcohol or
trichlorotriflorothane, do not use water, ketone or aromatics and never scrub hard.
3. Do not tamper in any way with the tabs on the metal frame.
4. Do not make any modification on the PCB without consulting Newhaven Display
5. When mounting a LCM, make sure that the PCB is not under any stress such as bending
or twisting. Elastomer contacts are very delicate and missing pixels could result from
slight dislocation of any of the elements.
6. Avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed
and lose contact, resulting in missing pixels and also cause rainbow on the display.
7. Be careful not to touch or swallow liquid crystal that might leak from a damaged cell. Any liquid crystal
adheres to skin or clothes, wash it off immediately with soap and water.
Static Electricity Precautions:
1. CMOS-LSI is used for the module circuit; therefore operators should be grounded whenever
he/she comes into contact with the module.
2. Do not touch any of the conductive parts such as the LSI pads; the copper leads on the PCB and
the interface terminals with any parts of the human body.
3. Do not touch the connection terminals of the display with bare hand; it will cause disconnection or
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
NHD-0216K1Z-FL-GBW
LCD MOD CHAR 2X16 Y/G TRANSFL
NHD-0216K1Z-FL-YBW
LCD MOD CHAR 2X16 Y/G TRANSFL
NHD-0216K1Z-FSA-FBW-L
LCD MOD CHAR 2X16 AMB TRANSFL
NHD-0216K1Z-FSA-GBW-L
LCD MOD CHAR 2X16 AMB TRANSFL
NHD-0216K1Z-FSB-FBW-L
LCD MOD CHAR 2X16 BLUE TRANSFL
NHD-0216K1Z-FSB-GBW-L
LCD MOD CHAR 2X16 BLUE TRANSFL
NHD-0216K1Z-FSO-FBW-L
LCD MOD CHAR 2X16 ORN TRANSFL
NHD-0216K1Z-FSO-GBW-L
LCD MOD CHAR 2X16 ORN TRANSFL
相关代理商/技术参数
NHD-0216HZ-FSW-GBW-3V3C
功能描述:LCD字符显示模块与配件 STN- GRAY Transfl 65.5 x 36.7 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FL-GBW
功能描述:LCD字符显示模块与配件 STN- GRAY Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FL-YBW
功能描述:LCD字符显示模块与配件 STN- Y/G Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FS
制造商:NEWHAVEN 制造商全称:NEWHAVEN 功能描述:Character Liquid Crystal Display Module
NHD-0216K1Z-FS(RGB)-FBW
功能描述:LCD字符显示模块与配件 FSTN (+) Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FS(RGB)-FBW-REV1
功能描述:LCD字符显示模块与配件 FSTN (+) Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FSA-FBW-L
功能描述:LCD字符显示模块与配件 FSTN (+) Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FSA-GBW-L
功能描述:LCD字符显示模块与配件 STN- GRAY Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk